How To Train Body To Be More Sensitive To Getting On-Time More Often (Hitting Jam Session #6)

Here’s the Hitting Jam Session Interview Collection with Perry Husband:Perry Husband & Joey Myers Hitting Jam Session #6

  1. Why You Should Not Teach Hitters To Hit Homers?
  2. What’s The Biggest Mistake Coaches Make In Boosting Ball Exit Speeds
  3. How To Make Teaching Proper Weight Shift In Swing More Understandable To Hitter
  4. Teach: How To STOP Hitting Excess Of Ground-balls & Fly-balls
  5. 5,000 Swing Experiments Validate Locked Lead Arm Is Superior To Bent
  6. [YOU ARE HERE] Overload Bat Training: Hitter Has To Work Butt Off To Resist “Casting”

Here’s what we discuss in this episode:

  • WHY a hanging FB (located down/away) is more likely to get hit harder than hanging off speed or breaker,
  • How every Major League hitter locks lead arm, may not talk about it, may not practice it, but when they hit their hardest “bolt” – they’re doing it,
  • Overload training: WHY Heavier weight is better, especially end loaded, hitter has to work their butt off with end loaded to keep from “casting”,
  • How changing length of bat and weight helps hitter learn how to adjust timing – training body to be more sensitive to timing,
  • And much more!

Without further adieu, here’s Hitting Jam Session #6…

 

Show Notes

  • At about the 2-minute mark, Perry and I discuss putting together a subscription based coaching program for coaches which would have access to our courses and have weekly coaching calls to mentor coaches, Twitter bantar…pitching philosophy used to be 70% fastballs, mixed up/down & inside/outside, then moved to away/away and down/down because hitting was hard to lift far away, then hitters started lifting those pitches – Moneyball & analytics, hitters focus now on swinging up and everyone on the field can go oppo bomb, teams will start elevating fastballs which will set in motion more stuff, odds of “up swings” getting to high heat will be more challenging, is the idea of throwing fastballs down “stupid”?  Perry did micro study…MLB – RHP v. RHH: FB up/in = 84.6-mph BES, SL down/away = 82.2-mph BES, CB down/away = 80.1-mph BES, & CH down/in = 86.5-mph BES (chose pitches that would be in that FB tunnel), a hanging FB (located down/away) is more likely to get hit harder than any other hanging off speed or breaker because every hitter is focused on the FB.
  • At about 12-minute mark, Perry study comparing middle three, upper three, and above three part of the zone with off speed and breaking (hanging stuff) versus the bottom three parts of the zone with fastballs…he counted number of hitters that averaged 90-mph BES…12 to 1 hitters favoring fastball down versus changeup up (12X more likely to avg. 90-mph BES), not a fair study, just a ballpark, today more likely to hit a fastball down than a hanging changeup up,
  • At about 14-minute mark, locked lead arm follow up, reader saying not many hitters using locked lead arm…Williams and Choo both lock lead arm and pull the ball – can locked lead arm help going to opposite field, every Major League hitter locks lead arm, may not talk about it, may not practice it, but when they hit their hardest bolt – they’re doing it, Perry talks about one of elite Fastpitch Softball hitters in the country Todd Budke locked lead arm (YouTube video of him hitting oppo dinger) – facing guys that made Randy Johnson look like a thumber 80-86-mph velo from 46-feet, bent front arm results in more balls fouled back, evidence of what happens when guys hit up/in pitch – they’re doing it with bent lead arm, can we do better than that with locked lead arm?  What happens when all fastballs go away EXCEPT the up/in fastball?  The “adjustable” hitting mindset isn’t going to work anymore when pitchers get more EV efficient
  • At about 23-minute mark, do young hitters from High School on down learn how to “hunt” pitches or wait till pitchers get better? Thank God pitchers still make mistakes, but what pitchers are being taught right now is to stay down with fastballs, sliders, etc.  It’s predictable.  When pitchers TRY to be EV efficient, things will be troublesome for hitters, the basic hitting approach of today is like a 2-strike approach (the “adjustable” swing), the adjustment will be much harder for hitters when EV tunnels are enforced, will happen at Big League level first, Greinke example using certain pitches to take hitter’s attention away from where hitter’s strength is, creating shiny objects, get swing down right, then figure out how to apply it,
  • At about 33-minute mark, I ask Perry his advice on how to teach 6-8yo to get more on time, Inner Game of Tennis book drills – 100% on-time 100% effective with swing mechanics (not about swinging as hard as you can), take and control “A” swing – best swing, being on-time to that pitch,
  • At about 38-minute, 30-sec mark, Perry talks about over under load training, we talk about Axe Bat and DriveLine 20% over/under $600 system, Perry asked Gray Cook’s advice about over/under load training in 1992, Babe Ruth did overload training, end loaded is key, does Axe bat’s 20% over/under go far enough? No.  Is it effective? Yes, but it doesn’t go far enough, would you get stronger with light weight in gym?  Heavier weight is better, especially end loaded, hitter has to work their butt off with end loaded +10 and control line drives, hitters will “cast” with an end loaded bat – but hitter MUST keep that from happening, Perry over/under load study +10 and -10 results were astounding looking at video of players and data – consistency numbers went up and recruitment of lower half, fastpitch softball Frosh case study 6-weeks no change in mechanics went from 55-mph to 62 or 63-mph BES, Reactive Neuromuscular Training (RNT) – this is what overload training is doing, feeding the “mistake”, Cook bands, TheStartingLineupStore.com Anchor Bat +10 and -5 wood bats over/under load system, locked lead arm, end loaded bat, and releasing barrel into “belly button” catcher’s glove,
  • At about 58-minute mark, Perry’s effective velocity timing sticks, change length of bat and weight – hitter is learning to adjust timing, training body to be more sensitive to timing, using different size, color, weight balls, “Riiiiight Now” Drill for 6-8yos to train timing, keep conscious mind busy, so unconscious mind can get to work,
  • You can find Perry Husband at HittingIsAGuess.com, use EV25 coupon code for any of the online courses.  @EVPerryHusband on Twitter, and @PerryHusband on Facebook.
  • My offer…FREE Catapult Loading System 2nd edition print book – just pay $8.95 shipping and handling (retails on Amazon for $19.97) – in addition you’ll get our essential consistent power online video mini-course Power Hitter 2.0: Engineering The Alphahttps://www.truthaboutexplosiverotationalpower.com/pl/60039

Are Instructors Confusing What “Casting” Is AND Is Not? (Perry Husband & HPL Hitting Jam Session #5)

 

Here’s the Hitting Jam Session Interview Collection with Perry Husband:

  1. Why You Should Not Teach Hitters To Hit Homers?
  2. What’s The Biggest Mistake Coaches Make In Boosting Ball Exit Speeds
  3. How To Make Teaching Proper Weight Shift In Swing More Understandable To Hitter
  4. Teach: How To STOP Hitting Excess Of Ground-balls & Fly-balls
  5. [YOU ARE HERE] 5,000 Swing Experiments Validate Locked Lead Arm Is Superior To Bent
  6. Overload Bat Training: Hitting Has To Work Butt Off To Resist “Casting”

Here’s what we discuss in this episode:Perry Husband & Joey Myers Hitting Jam Session #5

  • Instructors confusing what “casting” is and is not,
  • What if only fastball Mike Trout gets is what produces the 80.8-mph avg. BES, would that change his offensive stats?
  • Hitter using bent lead arm comes at a cost,
  • “Deep barrel dump” – great barrel path for down/away pitches, but TERRIBLE for up/inside pitches,
  • And much more!

Hitting Jam Session 5 above jumps right into the conversation already started…

 

Show Notes

  • At about the 2-minute mark, disclaimers…I was a skeptic on the locked lead arm since about 2 years ago, some out there cannot subscribe to a locked lead arm BECAUSE of what they teach – the “deep barrel dump” on every pitch depth, instructors are confusing what “casting” is and is not, it’s not a locked lead arm, it is a deep barrel dump regardless of pitch depth, nobody is 100% right or wrong, if stay in Science, then most will come to the same conclusions (on macros – maybe not micros),
  • At about 5-minute mark, what is and is not working for Mike Trout – bent lead up arm v. locked lead arm, fastballs up and in 80.8-mph avg. BES in 2018 (bent lead arm), and down and away 101.8-mph avg. BES (locked lead arm), what if the only fastball he gets is what produces the 80.8-mph avg. BES would that change Mike Trout’s offensive stats?  Trout is hitting in a target rich environment where pitchers are throwing fastballs DOWN and off speed and breaking stuff UP, which puts timing that sequence VERY similar – easier to hit, pitchers are STUPID to keep fastballs down to him, Perry’s categories for pitches: #1’s – fastest version of the fastball – 96+ mph, #2’s – slowest version of the FB and fastest version of off speed (splitter/cutter/slider up in the zone), #3’s – slower versions of splitter/cutter/slider down in the zone, and #4’s – curveballs, Trout killed 2’s, 3’s, and 4’s, Perry referenced the SBNation article about Trout on Effective Velocity, article had wide reach and pitchers started pounding Trout up – and he adjusted to an up/in approach, changed his attention of where he focused and hunted, can only cover so much as a hitter when it comes to hitting 1, 2, 3, and 4’s,
  • At about 14-minute, 30-secs mark, hitter using bent lead arm comes at a cost, in Trout’s case 80-mph avg. BES v. 101-mph BES, split A/B testing metaphor on Facebook ad changing only 1 thing – see what ad wins out over being shown randomly to an audience, split A/B test locked lead arm versus keeping it bent, what if all FB’s down/away disappear to Trout?  What would happen to his numbers?  What happens when an EV minded pitcher like DeGrom, Scherzer, Verlander, Bauer face Trout or Miggy? What about bettering reaction time? What happens to policeman when you take away time?  Ugly stuff – they have less time to make a decision (Perry referenced the book Blink), give extra time, see pitches easier, slow down fast stuff and speed up slow stuff…allows Trout to cover A LOT of pitches with same timing, as a pitcher you’re more likely to get away with hanging off speed or breaking stuff up in the zone than a fastball down and/or away,
  • At about 27-minute, 30-secs mark, Perry talks about how Jacob DeGrom ONLY mixed in a higher percentage of fastballs up in the zone (61% of the time – avg. postseason team was 44%) one year and cut his ERA in half!  Debunking the “deep barrel dump” – great for pitches on the outer 1/3 of plate or lower in the strike zone, but is TERRIBLE barrel path for inner 1/3 to inner half part of plate, some confuse “long swing” with locked lead arm, but it’s because of casting or deep barrel dump, Perry talks about the ball bungee attached with surgical tubing experiment: found bigger the stretch, the faster and less time it takes ball to hit wall, connection to hitting is taking slack out of the system (more elastic energy built up!),  fence drill – can do drill with locked lead arm if hold angle of bat close to following shoulder, keep 90-degree wrist angle tension w/ locked lead arm versus bent,
  • At about 36-minute, 30-sec mark, Stanton, Donaldson – when they hit 114-mph BES they’re in a closer to lead arm lock out position, why not find out how to figure out how to get hitters doing it versus explaining it away, multiple 100-mph BES younger hitters hitting balls off the tee, how many 100-mph BES players are being cheated by inferior mechanics, locked lead arm doesn’t just increase power but it also improves consistency of sweet spot to ball, Perry’s done 5,000 swing experiments on locked out front arm (Jay Bell was most known), in golf if golfers could hit it farther with a bent lead arm, then driving ranges across the world would be using bent lead arm, goal is still the same in baseball as in golf – hit it at max
  • At about 42-minute, 30-sec mark, locked lead arm being longer…it’s not a question of locked lead arm causes long or casting swing – it’s about when the hitter “releases” the barrel from the rear shoulder that causes the long or casting swing, the stubborn “deep barrel dump” barrel path being taught will become extinct when pitchers get more EV efficient and begin using hard stuff up in the zone, even if pitchers miss their mark by a foot they’ll still be effective – execute one in three pitches, you’ll be a super star just as long as you understand what your misses are doing, hitters must apply 100/100 all the time – 100% on-time, 100% effective, pitchers like Scherzer will be the norm and not the exception, dumping barrels on all pitches WILL NOT work, can lock at load or at start of the turn – objective is to take slack out before the turn,
  • At about 56-minute mark, pitcher and hitter adjustments over the decades: Bob Gibson days attacking up, hitters adjust and get good at driving up, then in 70’s and 80’s pitchers attacked down in the zone, now pitchers are beginning to adjust back up again, Perry says we’ll see one more drop with hitting, which will force hitters to rock bottom, buy a little more time swinging with bent front arm but at what costs, going to be really hard when hitter sees 100-mph up, then followed up with curveball that looks the same in the tunnel and drops, how longer arms effects contact points, all data right now is based on control of bent front arm, JUST TEST IT!  CLICK HERE for testing protocol Perry and I have talked about in these Jam Sessions, any change you make MUST positively affect ball exit speed AND frequency of line drives, message to those who are anti-tee, bent lead arm ball exit will be close to the same off tee and LIVE
  • You can find Perry Husband at HittingIsAGuess.com, use EV25 coupon code for any of the online courses.  @EVPerryHusband on Twitter, and @PerryHusband on Facebook
  • My offer…FREE Catapult Loading System 2nd edition print book – just pay $8.95 shipping and handling (retails on Amazon for $19.97) – in addition you’ll get our essential consistent power online video mini-course Power Hitter 2.0: Engineering The Alphahttps://www.truthaboutexplosiverotationalpower.com/pl/60039

“Put Hitters In Charge…Our Job Is To Eliminate Our Job” Perry Husband & HPL Hitting Jam Session #4

 

Here’s the Hitting Jam Session Interview Collection with Perry Husband:

  1. Why You Should Not Teach Hitters To Hit Homers?
  2. What’s The Biggest Mistake Coaches Make In Boosting Ball Exit Speeds
  3. How To Make Teaching Proper Weight Shift In Swing More Understandable To Hitter
  4. [YOU ARE HERE] Teach: How To STOP Hitting Excess Of Ground-balls & Fly-balls
  5. 5,000 Swing Experiments Validate Locked Lead Arm Is Superior To Bent
  6. Overload Bat Training: Hitting Has To Work Butt Off To Resist “Casting”

Here’s what we discuss in this episode:

  • “How do I get my son to stop hitting an excess of ground-balls (or fly-balls)?”Perry Husband & Joey Myers Hitting Jam Session #4
  • How swing intention is great, but its benefits can be suppressed by physical limitations,
  • The key ‘tinker & test’ learning principle helping hitters learn faster,
  • Why a hitting coach’s job is to eliminate their job,
  • And much more!

Hitting Jam Session 4 above jumps right into the conversation already started…

 

Show Notes

  • At about the 1-minute mark, question: how do I get my son to stop hitting ground-balls OR how do I get my son to stop uppercutting? What drills and mechanics?  What’s most essential get barrel on plane of the pitch.  If hitting too many ground-balls, then tell hitter to swing up.  If hitting too many popups, then tell hitter to swing down.  Perry talks about ground-balls most likely indicate being too early, and fly balls swinging too late.  Take BP round, up solid, down solid, then find the middle solid.  Matching feel and real, set up targets at distances on the field, like at a driving range in golf, and have hitter hit different target distance…hit a one-hopper v. 3-hopper v. 5-hopper v. NO hopper.  Now coach can cue that to correct extreme barrel angles.  Hitter can feel it but not see it, while coach can see it but not feel it.  Match real and feel.
  • At about the 7-minute, 30-secs mark, Carlos Pena really struggled on the up and in part of the strike zone (in 2009), what did Perry do to fix that…part was physical: he was really bent over at the waist (was at a 50-degree hip hinge – straightened him up a bit), the other part was approach: INTENTION…hunting up and in, trust ball flight to get what the reality is, using Bernstein’s Law of intent to change ball flight
  • At about the 12-minute mark, Joey Votto trying to cut down on strikeouts and wanting to match the pitch plane to give up some homers, Votto talked about how Mike Trout could put the ball anywhere on the field you asked him, don’t be obsessed with Launch Angles – gotta take care of the horizontals too, Ben Hogan willing changes to happen, Perry talked about demonstration of holding paper clip tied to a string, and paper clip starts spinning in a circle if you think it, control knobs in fingertips, intent is great but may be limited to physical ability, on Votto’s 2-strike approach changes – missing more balls he should’ve driven because he puts more emphasis on weighting the backside
  • At about 17-minute mark, if hitter swings up and is late, they’ll hit a lot of grounders, how to develop feel for things, swinging different sized and weighted bats (end loaded, balanced, and knob weighted), hitting different sized and weighted of balls, swinging at different points in the zone, hitting targets on the field at different depths, Make It Stick by Peter C. Brown on the power of variance, the Bean Bag study and the 2 bucket challenge, building multiple reference points, Perry played game with hitters in the cage, based on his 10-degree Launch Angle target in the cage 1-5 point scale, only get 10 balls (minimize 1’s and 2’s) – once they think about getting a 5, hitting the 3’s and 4’s are easier…intention: focus on ball flight
  • At about the 25-minute mark, Aaron Miles and our phone conversation about quality v. quantity swings, screwed up a bunt in game and next day cranked machine up to 95-mph on the field before game and bunted, Miles went on a tear after that, quantity reps are great but they better be quality reps, Aaron Miles coaches indy team in NorCal and says he’ll take a hitter who can hit 40 line drives out of 50 versus only 20, CLICK HERE for Perry’s launch angle tee test chart, I do similar test to get a ballpark of where the hitter is at – before lesson I have tee setup middle-middle and let them take 5 or so swings and make note of where they’re hitting the ball vertically and horizontally, if it’s measureable, then it’s manageable – even if you’re measuring distance (or eyeballing it)
  • At about the 33-minute, 30-secs mark, I asked Perry’s advice on the following comment from a 13yo hitter I received on one of my YouTube videos…

“I have been doing your catapult loading system method for hitting for about a month and a half now. I am the hitting ball harder than ever and it feels great. A coach yesterday, (while I was was hitting front toss at the beginning of practice) said that he thought I was rotating my shoulders too much and should keep a better posture in my swing. I got the hunch from your book. So I explained to him the catapult loading system method and he didn’t like it. He said it will cause me to pull off the ball and that no big leaguers do it. Then I named josh Donaldson, Aaron judge, and Andre mccutchen and said they all do it. He didn’t give me a really definitive answer after that. This coach uses the method of making a “positive move” towards the ball and “walking away from your hands” which I remember in your book you said is not what you teach. I am 13 and I was wondering how should I tell coaches about the catatpult loading system and why you don’t you like the “waking away from hands” method. I have had 3 coaches now comment on me showing the numbers and hiding the hands and they all said I won’t be able to hit faster pitching with it, but I have been smashing the faster pitchers (70-75 mph) and have done fine with it. Thx

  • …Perry asks hitters whose swing do you have, put hitters in charge, our job is to eliminate our job, hitter tells coach “Thank you, I’m going to give it a shot”, takes time to make changes in swing, not going to happen overnight, this player is on the right track, listen, soak it in, let some things leak back out
  • At about 38-minute mark, comment on my blog from alphabet soup acronym expert bashing tee use (CLICK HERE for link to comment)…you can hit a curveball farther because it arrives with backspin (from hitter’s perspective) and bat-ball collision wouldn’t have to reverse spin like a fastball arriving with topspin, Perry talked about how much farther hitters hit a ball off the “hover-ball” tee when backspin is put on ball before hitting it, 211 players averaged over .400 hitting 100-mph+ ground-balls, type of spin hitter puts on batted ball ball IS NOT predetermined by starting spin from pitched ball.
  • At about 49-min mark, how batting tees (like the Backspin Tee) can be beneficial to hitters, doing “circle drill” pitch recognition using tee in ideal situation, the only bad thing about hitting off tees is turning the head to see ball hit bat, in reality the brain doesn’t every see this happen, anti-tee people would be a difficult thing to promote,
  • At about 53-minute, 30-secs mark, Perry shows swing analysis swing-and-miss example of Spring Training game, being late on the pitch and where the barrel is at certain point in time, line of ball is at 4-degrees – barrel path is at about 13-degrees, clearly not in line with line of ball, pitcher ended up throwing right into this guy’s barrel middle away after throwing 3-pitches by him – dinger!  Target rich environment out there, most hitting approaches will work until pitchers go EV,
  • You can find Perry Husband at HittingIsAGuess.com, use EV25 coupon code for any of the online courses.  @EVPerryHusband on Twitter, and @PerryHusband on Facebook
  • My offer…FREE Catapult Loading System 2nd edition print book – just pay $8.95 shipping and handling (retails on Amazon for $19.97) – in addition you’ll get our essential consistent power online video mini-course Power Hitter 2.0: Engineering The Alphahttps://www.truthaboutexplosiverotationalpower.com/pl/60039

1,000’s Of Swing Experiments Confirm These Benefits Of Releasing Hitter’s Backside…

 

Here’s the Hitting Jam Session Interview Collection with Perry Husband:

  1. Why You Should Not Teach Hitters To Hit Homers?
  2. What’s The Biggest Mistake Coaches Make In Boosting Ball Exit Speeds
  3. [YOU ARE HERE] How To Make Teaching Proper Weight Shift In Swing More Understandable To Hitter
  4. Teach: How To STOP Hitting Excess Of Ground-balls & Fly-balls
  5. 5,000 Swing Experiments Validate Locked Lead Arm Is Superior To Bent
  6. Overload Bat Training: Hitting Has To Work Butt Off To Resist “Casting”

Here’s what we discuss in this episode:

  • Answered: “Making teaching of proper weight shift in your swing and more understandable to the hitter?”Perry Husband & Joey Myers Hitting Jam Session #3
  • 1000’s of swing experiments confirm benefits of releasing backside: higher Ball Exit velocity, better ball flight, and swing consistency,
  • How to fix hitters that over stride,
  • Why ‘force plate’ studies DO NOT mean a darn thing, unless they correlate these two critical metrics,
  • And much more!

CLICK HERE for the full Facebook LIVE video and conversation.

 

Show Notes

  • At about the 4-minute mark, what’s missing with current hitting philosophies and what is effective and what is not, filtering through the white noise, Science v. bro-science testing,
  • At about 6-minute mark, What’s #1 struggle with teaching hitting right now?  We answer reader question, “Making teaching of proper weight shift in your swing and more understandable to the hitter?” getting off the back foot, foul ball rate goes down significantly by releasing the back foot, increase in exit velocity when releasing the back foot, Perry’s 10,000 swing tests show these same things, take bat out of hand and try similar movements – i.e. lightly playing catch will allow back foot to “push” and “turn”, forward momentum and rotation, anything you can do to get the backside to release is great to model what we want them to do swinging.
  • At about 10-minute mark, the challenge with teaching hitting mechanics, some players (Rachel Garcia was mentioned) easier to demonstrate then do, what kind of learner that player is (seeing, hearing, feeling), throwing motion (feel learner), video or demonstration (visual), “release-mechanism” that ‘clicks’ hitting aid would be cool for an audio learner.
  • At about 13-minute, 30-second mark, Jim Macarelli responded, “the difference with throwing though as you know is the weight ends up on the front foot.” Centrifugal (center fleeing) v. Centripetal (center seeking), imagine throwing uphill versus throwing downhill, will be harder to get off your backside throwing up hill, not over front side – up against it when hitting, not every player gets off their backside, don’t take our word for it – test it!! Exit velocity, ball flight, and consistency all get better releasing the back side.
  • At about 17-minute mark, sure BAD Science is out there, here’s the key with Science, with what you’re doing – can that end result or outcome be replicated a majority of the time?  Bryce Harper WaPo article addressing biomechanics of shifting weight into the ball, squishing bugs and backside hitting transfers only 75% of hitter’s bodyweight VERSUS releasing backside and transferring 150% of bodyweight into impact, Perry’s swing experiments found a 6-mph increase in Ball Exit Speed, bat speed during back foot skip releases much closer to impact whereas a backside weighted swing top out bat speed is sooner than impact,
  • At about 21-minute 30-second mark, dumping barrel right in front of catcher’s glove regardless of pitch depth is DANGEROUS for hitters career-wise, causes big loop in swing and hole up in the zone, Hank Aaron, Rod Carew, Roberto Clemente all released the back foot, Jim Macarelli asks “I think the challenge with teaching kids is we want them to stride and shift their weight forward, but we want them to FINISH with their weight back, not stay back throughout the swing… if that makes sense. Timing clearly effects the back foot. When of time the backside releases and when late, often not.” Hitters like Babe Ruth and Ted Williams released the back foot, then fell back onto back foot during finish, release first, then fall back,
  • At about 25-minute mark, how do we control our hitters from over-striding, belly button is our center of mass, axis of rotation during front and back flips, using variance to teach hitters not to over-stride: stride with belly button finishing over front knee at landing, then stride and land with belly button behind back knee, then stride keeping belly button in the center of legs, then stride keeping belly button behind front knee, then lastly stride keeping the belly button inside the back knee, all about locomotion, Tai Chi and shifting bodyweight, to do a lunge to the right – I have to shift my weight left to move to the right (and opposite for the opposite direction), Perry talks about the Reebok core board (feedback tool), experimenting with weight shift – downhill versus uphill, using Power Up Wedge
  • At about 31-minute 30-second mark, Nassim Talib’s book Antifragile – the majority of invention and innovation in history stems from tinker and testing NOT research and study, aspirin, penicillin as examples, Mike Ryan from Fastball USA has some great variance or chaos training stuff, David Weck and his Bosu Ball, striding uphill/downhill, try different things, tinker test, 3-D Hitting, Perry going to do stuff with University of Oregon softball, WARNING with some of these “force plate” tests: if it doesn’t include ball flight and exit velocity we don’t want to talk about it, how can we make any kind of conclusion from the data without that? Is happening off tee or LIVE pitching, releasing or spinning on backside, MYTH: the more ground force created is better, how does that translate to ball exit speed and ball flight?
  • At about 38-minute, 30-second mark, how to do these swing experiments, changing one swing variable at a time, then re-test, can take ANY hitter do a control round, change, and re-test to see how the change affected the control swings, Frosh softball High School player did over/under load training ONLY in a 6-week span, after re-testing went from 55-mph BES (control) to 62-mph, whoever you follow hitting guru-wise, get control swings, make the change, re-test, and see how BES and ball flight changed – for better or worse, what’s your main objective teaching hitters – high hard contact rate? Decrease strikeouts?
  • At about 44-minute mark, Perry talks about how effective or ineffective were the 2-strike adjustments Joey Votto made, CLICK HERE for Perry’s analysis article on this, in 2-strike counts: balls fouled back, swung and missed, etc. were balls he could have done damage with, can elite hitters foul balls off on purpose, Votto wasted so many good pitches with a less aggressive approach with 2-strikes, when Perry worked with Carlos Pena in 2009: K’s went down 25%, BA went up 25%, 2-strike BA went from .185 to .240, tripled his output with 2-strikes, Votto approach didn’t make much sense – he may have cut down on his K’s but his production went way down compared to before the change, reactionary hitting will die with EV efficient pitching, Joey Votto FanGraphs article, “Joey Votto Has Just Simply Stopped Striking Out”
  • At about 52-minute mark, discuss how poorly hitters will do when pitchers get more EV efficient, CLICK HERE for a video Perry did analyzing Chris Davis (of the Orioles), perfect example of a hitter gearing his swing to about a stubborn 6-mph EV zone regardless of pitch type, location, or speed, all 50-something of the homeruns he hit pitchers ran the ball right into his bat, when target rich environment goes away (pitchers throwing balls into barrel), it’s going to be a cold dark day in hitting, adjust or die, Carlos Pena’s chase rate went down 18% in 2009, changing the physical can take time (Perry suggests 3-4 months for more entrenched habits) – my research suggests 66-days to change a habit.
  • Find Perry Husband at HittingIsAGuess.com, use EV25 coupon code at checkout for online video courses.  If coupon code doesn’t work, then contact Perry and he’ll reset for you.
  • My offer…FREE Catapult Loading System 2nd edition print book – just pay $8.95 shipping and handling (retails on Amazon for $19.97) – in addition you’ll get our essential consistent power online video mini-course Power Hitter 2.0: Engineering The Alphahttps://www.truthaboutexplosiverotationalpower.com/pl/60039

“Best Drill For Being Out In Front All The Time. Always Makes Contact Way Out In Front, Weak Hits & No Power”…

 

Here’s the Hitting Jam Session Interview Collection with Perry Husband:

  1. Why You Should Not Teach Hitters To Hit Homers?
  2. [YOU ARE HERE] What’s The Biggest Mistake Coaches Make In Boosting Ball Exit Speeds
  3. How To Make Teaching Proper Weight Shift In Swing More Understandable To Hitter
  4. Teach: How To STOP Hitting Excess Of Ground-balls & Fly-balls
  5. 5,000 Swing Experiments Validate Locked Lead Arm Is Superior To Bent
  6. Overload Bat Training: Hitting Has To Work Butt Off To Resist “Casting”

Here’s what we discuss in this episode:

  • Short Intro’sPerry Husband & Joey Myers Hitting Jam Session #2
  • Most effective ways to boost BES
  • How to know “who/what” to follow – by doing swing experiments
  • Swing eval at home & future case study Jam Sessions
  • Q/A

You can also CLICK HERE to view the original video and comments from the Jam Session on Facebook.

 

Show Notes

  • At about the 30-sec mark, the whole point of these Jam Sessions, equipping coaches to do petri dish evaluations at home collecting data, bringing us this data, and we can help coaches get their hitters better using real data and human movement principles validated by real Science.
  • At about 5-minute, 30-sec mark, Perry answers what he thinks is the biggest mistake coaches make in boosting ball exit speed, watching videos on YouTube, the lead arm shape (bend or straighten?), locking out beforehand causes a chain reaction that stretches out rubber bands, going from bent to straight right at impact doesn’t optimally stretch out rubber, not most important thing – is a piece of the machine, a bunch of things pieced together.
  • At about 8-minute mark, addressing why a barred front arm gets a bad rap on causing “longer” swings, correlation DOES NOT equal causation in this case, a consistent front arm shape equals consistency at bat-ball contact, Perry talks about “laser” experiment comparing a bent lead arm versus a barred out front arm (about 11-min mark), interestingly laser was all over with bent arm versus closer to “line” with straight front arm, getting barrel in line and keeping it there, with front arm bend there’s too much free play, at least twice as good arm bar versus bend when it comes to consistency.
  • At about 13-minute mark, talk about the main benefits to a front arm bar, longer levers multiply force at the end of the lever, a longer swing IS NOT about a bent or straight front arm – it’s about when the barrel leaves the rear shoulder, end loaded heavy bats are fantastic for training barrel path for different pitch depths, look at hitters hitting 95-mph inside – they use shorter more compact swings (the barrel leaves the shoulder later).
  • At about the 17-minute mark, Perry shares another experiment where he used a ball attached to surgical tubing attached to an anchor, pulling ball back 8-feet, then letting go and measuring speed, then stretching the tubing back further, speed increases and ball hits wall sooner than the shorter pull back, Perry explains shortening front arm can help get on time but hitter gives up hard ball contact (70% their 1-arm max).
  • At about 20-minute, 30-sec mark, talking about when you’re teaching hitters, what is your hitting “operating system”?  Is your goal for hitters to increase hard ball contact?  Is it to reduce strikeouts?  Based on your hitting operating system, you’ll choose specific hitting mechanics that organize that support the specific operating system,  barrel path will change based on pitch depth, swing to match timing – reactionary hitting, the other side of the coin is to max out 100% on-time, 100% swing effective.
  • At about 25-minute, 30-sec mark, how do we know who to follow or what to follow, Perry goes over swing evaluation you can do at home (CLICK HERE for a PDF spelling this out), build a target – Home Depot tarp, 2-foot diameter circle, cut hole in middle of circle (1-foot) creating donut, bottom of target is inline with bottom of ball on tee, target is 10-feet in front of hitter, hit top of target roughly 20-degree, middle roughly 10-degrees, measure ball exit speeds, give points: 1-point for hitting it through the middle, hits outside ring 0.5-point, miss target = 0.  Out of ten swings good is 4/10 (or .400).  If not at .400, then something is missing.  Average ball exit speed should be around 90% of your 1-rep. max.  Plot where the misses are, and number which hits they were. (Ask Perry for blank diagram on this).  Measuring ball exit speed with Zepp, SwingTracker, BlastMotion, PocketRadar, Bushnell Radar gun,
  • At about 33-minute mark, Perry talks about use of imagination or visualization, physical changes are tough under competitive pressures of a game, practicing your game swing, changing intent changes the swing, i.e. hitter hitting pop ups, changing intent to hit a low screaming line drive helps brain organize body to change the swing without thinking internal cues.
  • At about 39-minute mark, imagine a bendy tube attaching the pitcher’s release to contact, we want the hitter to hit the ball back through tube the pitch came from, external cues versus internal cues, getting a ballpark of what the hitter is doing by setting hitter up on a tee that is positioned as a middle middle location, if hitter is pulling all the time or going other way too much or popping ball up too much or hitting a lot of ground-balls, along with ball exit speed measurements.
  • At about 42-minute mark, Perry asks me about the springy fascia, the idea of a “rubber suit” creating stretch in the suit as you twist up, springy ‘X’ pattern – ‘X’ on chest and back, compression and tension forces, Granite has a high compression rate but has a terrible tension rate, Boom crane tension forces can be found in the cable holding the wrecking ball, body uses both compression and tension forces, hitter’s front shoulder comes in and down (shortening chest leg of the ‘X’), other leg of the ‘X’ on the chest lengthens, on the backside – the corresponding legs of the ‘X’ does the opposite, Scapula Row?  Biggest mistake coaches make is forcing hitters to keep front shoulder straight instead of protracting the front Scapula, Arm barring front arm helps with ‘showing numbers’ AND ‘hiding hands’.
  • At about 60-minute mark, hitter lets go of bat hits 370-foot homer, while holding on hits ball 480-feet, pitch velocity and location were same, timing was a little different, Physicist Dr. Alan Nathan says once bat is in motion hitter doesn’t have to hold onto bat at impact – force is already there, locking out at impact helps transfer energy better, look at all the data on batted balls that go the farthest – they look the same, arm is locked out, test hitting a fully inflated basketball exit speed should be around 80% of 1-rep max – if not then losing swing effectiveness, Newtonian Physics v. non-Newtonian Physics, Physics is limited to Physics (external forces), Bio-Mechanics is limited to Biomechanics, etc.
  • About about 57-minute mark, Perry answers question: “Best drill for being out in front all the time, always makes contact way out in front, weak hits and no power?” Every pitch location has one ideal contact point, make swing in slow motion to find what’s optimal, body is reaching too much, one drill: the “Riiiiiight-Now!” Drill (“Right” is at release, where impact is the “now”).
  • HittingIsAGuess.com @EVPerryHusband, special offer for any of his online courses use: EV25 discount code
  • Special offer from me the FREE print Catapult Loading System Book, just pay $8.95 Shipping & Handling (retails on Amazon for $19.97)https://www.truthaboutexplosiverotationalpower.com/pl/60039

How To Become A Line Drive Hitting Machine When Focusing On “Miss” Quality Control (Perry Husband & Joey Myers Facebook LIVE Jam Session #1/6)

 

Here’s the Hitting Jam Session Interview Collection with Perry Husband:

  1. [YOU ARE HERE] Why You Should Not Teach Hitters To Hit Homers?
  2. What’s The Biggest Mistake Coaches Make In Boosting Ball Exit Speeds
  3. How To Make Teaching Proper Weight Shift In Swing More Understandable To Hitter
  4. Teach: How To STOP Hitting Excess Of Ground-balls & Fly-balls
  5. 5,000 Swing Experiments Validate Locked Lead Arm Is Superior To Bent
  6. Overload Bat Training: Hitting Has To Work Butt Off To Resist “Casting”

Here’s what we discuss in Hitting Jam Session #1:

  • Formal Introductions,Perry Husband & Joey Myers FB Jam Session #1
  • Carlos Pena and Boston Red Sox hitting coach phone conversation for segment on MLB Now Show,
  • Bro-Science v. REAL Science,
  • How to know who/what to follow,
  • Demystifying Launch Angles, and
  • Q&A…

You can also CLICK HERE to view the original video and comments from the Jam Session on Facebook.

 

Show Notes

  • At about the 3-minute mark, Perry Husband shares a phone conversation he had with Carlos Pena and Boston Red Sox hitting coach Tim Hyers about Effective Velocity (EV) tunnels from a hitter’s perspective (watch Liquid Analytic videos to MLB Now segments below)
  • At about 5-min, 30-secs mark, cool swing experiment Perry did with Tim Hyers in the past, showing how same speed pitch “appears” faster or slower depending on location in the zone, and how this disrupts a hitter’s reactionary timing (aka hitter’s “attention”).  Gear hitters to a speed, they focus on that speed – changing it causes hitters to be early or late.
  • At about 12-min, 30-min mark, the basic idea of Liquid Analytics, and how to look at pitchers through EV “eyes” we can get hitters to understand the best approach against certain pitchers.  How pitchers adapt to changes to hitter’s approach, it’s like a Chess game, approaches can shift and change multiple times throughout the game, and how to use Liquid Analytics to make these changes predictable.
  • At about 15-min mark, we talk about sabotaging hitting coaches who have no clue how to counter EV by releasing EV 101, 202, and 303 to pitchers.  This will take a couple years for younger pitchers to catch up.  Our hitters will have the anecdote.  2018 World Series was a great picture of a team using EV on both sides of the ball (Red Sox), and a team that really wasn’t (Dodgers).  Any hitting approach right now will get away with murder, but when pitchers get EV efficient, most approaches that don’t take EV into account will die off.
  • At about 20-min mark, Perry using the football cornerback analogy to explain EV tunnels and where hitters tend to stay when it comes to timing pitches.
  • At about 22-min mark, what is the main operating system you’re teaching your hitters? Decrease strikeouts? Hit homers?  Increase Batting Average?  Hard Hit Contact %?  Every drill, teach, hitting aid, etc. will lift up the main operating system, example of the early armbar teach in mechanics.
  • At about 25-min mark, these Jam Sessions are an experiment in themselves, what you’re doing right now may be working, but someone somewhere is doing it better, how to find out what “optimizing” hitters looks like, tinker and test, tinker and test, Growth Mindset v. Fixed Mindset, swing experimentation, REAL Science v. “bro-science”, Scientific Method: question, hypothesis, research & study, collect data (experiment), conclusion, is data Science? Jam Sessions going forward…
  • At about 31-min 30-sec mark, Perry starts talk on Launch Angles, Jay Bell experiment (at 10-degree Launch Angle), hit center of circular target at about 10-feet to measure Launch Angles, early or late hitter pulls or pushes the ball away from the center of the target, more ground-balls – hitting ball later in the swing arc, pop-fly – hitting ball earlier in the swing arc, comparing 9 possible golf shots to hitting, precision in golf.
  • At about 36-minute mark, ranking 10 swings off a tee using the circular target, how many times hit the target, measuring precision how often swing line is inline with pitch, hitter is going to miss more than they hit it good, Aaron Judge 75% of his one-rep swing max a majority of the time, it’s not about hitting it perfect, it’s the quality of your misses.
  • At about 41-min mark, are ALL ground-balls bad? 100-mph+ GB’s equals batting over .500 at the Big League levels, take out ground-ball hits and Donaldson hits .205, it’s about maxing out the Ground-balls, 90-mph fly-balls – how many guys hit .400? zero.  Did you know MLB skews data on fly-balls by adding line drives in the formula.
  • At about 45-min mark, I talk with my hitters about hitting the ball back through the “tube” that it came from, roughly misses are 40% up, 20% on a line, and 40% are down, trying to hit fly-balls causes more ground-balls?  Base your hitter’s operating system on the Jay Bell 10-degree Launch Angle, -5-degrees to 25-degrees highest exit velocities – keep misses within 10-degrees above or below the 10-degree line, extreme up Launch Angles will create a big hole in the swing for EV-minded pitchers to exploit, it’s about the “miss”
  • At about 50-min mark, we finish with Q&A…

Where you can find more about Perry Husband:

  1. HittingIsAGuess.com use discount code: EV25 for 25% OFF
  2. Twitter: @EVPerryHusband

 

Liquid Analytics Show Segments Discussed in this Jam Session

 

 

How Barrel Enters Zone At “Right” Time & Optimizing Impact Points Rock-On-A-String Demonstration

 

In this video, we’ll chat about the difference between two opposing forces described in Physics as Centripetal (center “seeking”) versus Centrifugal (center “fleeing”), and how they apply to the swing.Centripetal v. Centrifugal Forces Rock-on-a-String Demonstration

I borrowed this ‘rock-on-a-string’ concept from Jim Lefebvre’s book The Making of a Hitter.  I understood it as a hungry 11yo hitter looking for an edge, and I think it’s still applicable now to help hitters understand their intention with barrel path.

Yes obviously, barrel path is in an arc, circle, oval, elipse, etc whatever helps get the point across.  However, to get an optimal impact point, hitters must think in terms of center seeking versus center fleeing forces.

It’s easy to understand optimal impact points and how they relate to Centrifugal Forces (center fleeing) when looking at what the left and right “flappers” must do to hit a pinball effectively…

Superman Pinball Machine

Superman Pinball Machine photo courtesy: www.supermanhomepage.com

…think of the flappers as hitter swinging a bat.  There are optimal depths of impact – from MORE out-in-front (inner 1/3 of the plate), to out-in-front (middle 1/3), and to slightly DEEPER than out-in-front (outer 1/3).  This demonstrates the Centrifugal Forces (center fleeing) part of the barrel arc.

Centripetal Forces (center seeking) of WHEN the barrel enters hitting zone depends on pitch depth – how long the barrel stays near the rear shoulder.  And here’s the critical mass, the barrels of elite hitters DO NOT enter the zone at the same time, regardless of pitch depth.  CLICK HERE for a post clearing this up.

Here Are 4 Quick Ways To Fix A Long Casting Barrel…

…One of my favorite hitting demonstrations to do with hitters to help them understand the need to stack the bat’s “belly button” above theirs.  A flat bat at landing can cause a few of the following things:Belly Buttons, Center Of Gravity, & Quick Way To Solve A Flat Bat

  1. Hands drop (CLICK HERE to fix this),
  2. Racing back elbow bat drag (CLICK HERE for a video on how to use Finger Pressure to combat this), or
  3. A long casting barrel (CLICK HERE for a post that sheds light on how to fix this)

Since we’re on the subject of drills fixing specific swing dysfunction, CLICK HERE (solution #4) to see the “Flashlight Barrel Angle” drill to fix a flat bat at landing 😉

Demonstration On How To Take “Slack” Out Of The System (and what it means)

Here’s a great way to help coaches and players understand taking slack out of the system, demonstrating the power of the spinal engine.

We call it the “coiling” core, NOT the “braced” core most teach their hitters.  A braced core is fantastic in the weight room, but NOT in the Spinal Engine - Wringing Towel Out Demonstrationbatter’s box.  CLICK HERE for an interview I did with Bosu Ball inventor David Weck, where he takes a deeper dive into this.

Some understand the importance of shoulder-hip separation, but what most don’t know is that we MUST create tension in the neck – where the ‘C’ and ‘T’ sections of the spine connect, as well.

And here’s what most ARE NOT saying…an inward turn of the hips is not important, if not detrimental, to the beach towel effect of the spinal engine.

Many say the swing of Ted Williams resembled the twisting of a Barber Pole.  The above video clearly demonstrates what was happening in his swing that some observed.  CLICK HERE for a post I did on the swing of Ted Williams.

Here’s A Quick Way To Help Hitters Understand Springy Fascia Power…

Most coaches understand the function of bones and muscles in the body, but don’t understand springy fascia, which is:

  • A cotton candy or spider webby like material,
  • What bones and muscles float in,
  • What gives muscles their shape,
  • Made up of mostly collagen fibers (and some elastin) – ask the Kardashians,
  • To the human body as steel is to the building industry,
  • Great at resisting change in shape,
  • A material of the body that DOES NOT need much in nutrients (e.g. food) to move like muscles do,
  • An injury to connective tissue (springy fascia) can take over 200-days to heal, whereas a muscles can take only 90-days to regenerate,
  • Like the bag carrying potatoes you buy at the supermarket, whereas the potatoes represent the bones and muscles.

CLICK HERE for a post we did titled, “4 Tips On How To Train Springy Fascia”.  In the above video I use the Thomas Myers Anatomy Trains ‘snapping finger’ test to demonstrate the power of springy fascia.